The electron microscope did not arrive as a single invention. It grew out of a chain of ideas in physics, a handful of stubborn engineering projects in the 1930s, and decades of work on lenses, detectors, sample preparation and computing. Following that chain explains why modern instruments look the way they do and why some limits took more than sixty years to break.
Before the instrument: the physics that made electron microscopy possible
Light microscopes hit a wall set by the wavelength of visible light. Around the end of the nineteenth century it was already clear that no optical design could resolve details much smaller than roughly 0.2 micrometres. Getting past that limit needed a different kind of illumination.
Three steps opened the door:
- 1897 – J. J. Thomson identifies the electron as a particle carrying negative charge.
- 1924 – Louis de Broglie proposes that particles such as electrons also behave as waves, with a wavelength that shrinks as their momentum grows. Accelerated electrons turn out to have wavelengths thousands of times shorter than visible light.
- 1926 – Hans Busch shows that a short, rotationally symmetric magnetic coil focuses a beam of electrons in the same way that a glass lens focuses light. This is the theoretical birth of electron optics.
With a short wavelength and a way to focus it, the remaining problem was engineering: a stable high-voltage source, a vacuum good enough for the beam to travel, and a way to record an image the human eye cannot see directly.
1931–1933: Knoll, Ruska and the first electron microscope
At the Technische Hochschule in Berlin, the engineer Max Knoll and his student Ernst Ruska were working on cathode-ray oscillographs. In 1931 they built a two-stage instrument with two magnetic lenses that produced a magnified image of a metal grid. The magnification was tiny, about 17 times, but the principle worked: electrons could form a real, magnified image.
Ruska pushed the design forward with iron-shrouded pole-piece lenses that concentrated the magnetic field. In 1933 he built an instrument whose resolution exceeded that of the best light microscopes. That moment is usually treated as the true start of transmission electron microscopy (TEM).
Why the early images were hard to use
The first instruments burned and charred most biological samples, and specimens had to be thin enough for electrons to pass through. Many scientists doubted that the technique would ever show living matter in a meaningful state. Much of the next twenty years was spent on preparation methods rather than on the microscope itself.
Electron microscope history timeline: from prototype to commercial TEM
Once the principle was proven, several groups in Europe and North America raced to build usable instruments. The table below summarises the milestones that matter most for understanding today's equipment.
| Year | Milestone | Key people or makers | Why it mattered |
|---|---|---|---|
| 1931 | First two-lens electron microscope | Max Knoll, Ernst Ruska | Proved that electrons can form a magnified image |
| 1933 | Resolution beyond the light microscope | Ernst Ruska | Start of practical TEM |
| 1936 | EM1 built in the United Kingdom | Metropolitan-Vickers | One of the first instruments built by an industrial company |
| 1937–1938 | Early scanning electron instrument | Manfred von Ardenne | Introduced the idea of rastering a fine beam over a sample |
| 1938 | Research TEM at the University of Toronto | Eli Franklin Burton, James Hillier, Albert Prebus | Seeded electron microscopy in North America |
| 1939 | Series production of TEMs | Siemens, with Ruska and Bodo von Borries | Electron microscopes become laboratory instruments |
| 1940 | Commercial TEM in the United States | RCA, with James Hillier | Wider access in industry and universities |
| 1965 | First commercial SEM (Stereoscan) | Cambridge Instrument Company | SEM moves from research prototype to product |
| 1970 | Single heavy atoms imaged in STEM | Albert Crewe | Field emission sources show atomic-scale potential |
| 1997–2002 | Working aberration correctors | Maximilian Haider, Harald Rose, Knut Urban; Ondrej Krivanek | Sub-ångström imaging becomes routine |
| 2012–2014 | Direct electron detectors in cryo-EM | Many groups and manufacturers | The "resolution revolution" in structural biology |
| 2017 | Nobel Prize in Chemistry for cryo-EM | Jacques Dubochet, Joachim Frank, Richard Henderson | Recognition of cryo-EM as a core structural method |
The Second World War slowed civilian work in Germany and destroyed part of the early equipment, but by the late 1940s TEMs were being built in Germany, the Netherlands, the United Kingdom, the United States and Japan. Competition between makers drove steady gains in stability, voltage and resolution through the 1950s and 1960s.
Making samples visible: the preparation breakthroughs of the 1950s
A microscope is only as good as the specimen inside it. The real expansion of electron microscopy into biology came from preparation methods, not from the columns alone:
- Chemical fixation and resin embedding preserved cell structure well enough to survive the vacuum and the beam.
- Ultramicrotomy with glass and later diamond knives produced sections thin enough for electrons to pass through.
- Heavy-metal staining with osmium, uranium and lead salts added contrast to otherwise transparent biological material.
- Negative staining, introduced for viruses at the end of the 1950s, outlined small particles against a dense background.
- Freeze-fracture split frozen membranes open and revealed their internal faces.
These methods let cell biologists map mitochondria, the endoplasmic reticulum, ribosomes and synapses for the first time. Albert Claude, Christian de Duve and George Palade shared the 1974 Nobel Prize in Physiology or Medicine for work on the structural and functional organisation of the cell, much of it built on electron micrographs. If you want to see how a modern instrument forms those images, our guide to transmission electron microscopy and its imaging modes walks through the column step by step.
History of the scanning electron microscope
The scanning electron microscope (SEM) followed a different path. Instead of sending a broad beam through a thin sample, it sweeps a finely focused probe across the surface and builds the image point by point from the signals that come back.
- 1935–1938: Max Knoll describes a scanning arrangement, and Manfred von Ardenne builds an early scanning instrument in Berlin.
- Early 1940s: a group at RCA, including Vladimir Zworykin and James Hillier, tests a scanning design for surface imaging, but the results cannot compete with TEM at the time.
- From 1948: Charles Oatley at the Cambridge University Engineering Department starts a long programme of SEM research with a series of PhD students, among them Dennis McMullan and Kenneth Smith.
- 1960: Thomas Everhart and Richard Thornley develop an efficient secondary electron detector, still known as the Everhart–Thornley detector.
- 1965: the Cambridge Instrument Company releases the Stereoscan, the first commercial SEM, and other manufacturers follow within a few years.
The SEM's large depth of field gave it an almost three-dimensional look that made it popular far beyond physics, from metallurgy and geology to entomology and forensic work. Energy-dispersive X-ray detectors, added in the following decades, turned it into an analytical instrument as well as an imaging one.
Lenses that fought physics: aberration correction
As early as 1936 Otto Scherzer proved that round, static electron lenses always suffer from positive spherical and chromatic aberration. This "Scherzer theorem" explained why practical resolution stayed far above the theoretical limit set by the electron wavelength. Scherzer later proposed ways around it using non-round multipole elements, but building a corrector that was stable enough to help, rather than hurt, took half a century.
In the late 1990s two approaches finally worked. Maximilian Haider, Harald Rose and Knut Urban demonstrated a hexapole corrector for TEM, and Ondrej Krivanek and colleagues developed quadrupole–octupole correctors for scanning transmission electron microscopy (STEM). Corrected instruments reached and then passed the one-ångström mark, and the four pioneers shared the 2020 Kavli Prize in Nanoscience.
Key takeaway: the jump from "near-atomic" to "atomic" electron microscopy came less from higher voltages than from better optics, more stable electronics and faster, cleaner detectors.
History of cryo-electron microscopy
Biological molecules are mostly water, carbon and nitrogen, and they are easily destroyed by the beam. Cryo-electron microscopy (cryo-EM) solved this through several separate lines of work that eventually merged:
Three-dimensional reconstruction
In 1968 David DeRosier and Aaron Klug showed how to reconstruct a three-dimensional object from a set of two-dimensional electron micrographs. Klug received the 1982 Nobel Prize in Chemistry for crystallographic electron microscopy and the structures of nucleic acid–protein complexes.
Membrane proteins and low-dose imaging
In 1975 Richard Henderson and Nigel Unwin produced a three-dimensional map of bacteriorhodopsin using very low electron doses. In 1990 Henderson's group published an atomic model of the same protein, proving that electron microscopy could compete with X-ray crystallography.
Vitrification and single-particle analysis
In the early 1980s Jacques Dubochet and colleagues found a way to freeze thin films of water so quickly that they turned into glass-like, non-crystalline ice, keeping molecules in a near-native state. In parallel, Joachim Frank developed image-processing methods that sorted and averaged thousands of noisy images of individual particles. Together these became single-particle cryo-EM.
The decisive push came around 2012–2014, when direct electron detectors and motion correction software replaced film and older cameras. Resolution jumped, and structures of large complexes that had resisted crystallisation appeared at an unprecedented pace. In 2020 two groups reported cryo-EM maps of the protein apoferritin at about 1.2 Å, resolving individual atoms. For the practical side of the method, see our explainer on how cryo-EM reveals protein structures.
Nobel Prizes connected to electron microscopy
| Year | Prize | Laureates | Contribution |
|---|---|---|---|
| 1974 | Physiology or Medicine | Albert Claude, Christian de Duve, George Palade | Structural and functional organisation of the cell |
| 1982 | Chemistry | Aaron Klug | Crystallographic electron microscopy |
| 1986 | Physics | Ernst Ruska (shared with Gerd Binnig and Heinrich Rohrer) | Design of the first electron microscope |
| 2017 | Chemistry | Jacques Dubochet, Joachim Frank, Richard Henderson | Cryo-electron microscopy for biomolecules in solution |
Ruska's prize came fifty-five years after his first instrument, one of the longest gaps between a discovery and its recognition in Nobel history. Binnig and Rohrer, who shared that 1986 prize, had invented the scanning tunnelling microscope, which belongs to the probe-microscopy family rather than to electron optics.
Where electron microscopy is heading now
The history is still being written. Current directions include:
- Cryo-electron tomography, which images molecules inside thin slices of whole cells cut with focused ion beams.
- Electron diffraction of microcrystals (MicroED), used for small molecules and proteins that form only tiny crystals.
- 4D-STEM and electron ptychography, which record full diffraction patterns at each probe position and have pushed lateral resolution in thin crystals well below half an ångström.
- In situ microscopy, where samples are heated, strained, charged or kept in liquid or gas while they are imaged.
- Automation and machine learning for data collection, particle picking and image analysis.
Each of these extends a pattern visible since 1931: the gains come when optics, detectors, sample handling and computation move forward together.
Conclusion
The history of electron microscopy runs from Busch's magnetic lens theory and Ruska's 17-times prototype to corrected instruments that resolve single atoms and cryo-EM maps that show the chemistry of proteins. The milestones that changed the field most were often not new microscopes but new ways to prepare samples, correct lenses and record electrons. Knowing that sequence makes it easier to understand the strengths and the limits of whichever instrument you use today.